Scuderia Ferrari SF70H

[ScrewCaptain27]

https://imgr3.auto-motor-und-sport.de/S ... 011644.jpg
http://www.auto-motor-und-sport.de/form ... 38323.html

Car running pretty flat, reduced rake.

White part is a foam block used to measure tyre expansion.

http://i1376.photobucket.com/albums/ah3 ... mh9rzh.jpg

[Sevach]

[probenprinz]

https://pbs.twimg.com/media/C6YbUsZWQAAVGDG.jpg:large

I have a question to aero guys :
but when you mount this kind of machinery (in this case overlapping the rear wing plates) you don't have changed the flow you are trying to measure ?

[3jawchuck]

https://pbs.twimg.com/media/C6YbUsZWQAAVGDG.jpg:large

I have a question to aero guys :
but when you mount this kind of machinery (in this case overlapping the rear wing plates) you don't have changed the flow you are trying to measure ?

Not an aero guy, but, I'll have a shot. Looks like they're measuring diffuser and rear wheel flows and so on, so while the wing flow will probably be messy, it shouldn't make much of a difference to the measured areas.

[matt21]

AMUS is suspecting some kind of trickery in the floor due to different texture of the carbon fibre.

I would agree that there is something due to the temperature stickers.

Edit: Could they run some sort of surface cooling? Maybe this helps reducing radiator size. Or even could influence the air flow.

[F1Krof]

AMUS is suspecting some kind of trickery in the floor due to different texture of the carbon fibre.

I would agree that there is something due to the temperature stickers.

https://imgr3.auto-motor-und-sport.de/K ... 022292.jpg

Flexi floor? Are they even supposed to flex? Are they even allowed? Man this car is a beast.

[.poz]

https://pbs.twimg.com/media/C6YbUsZWQAAVGDG.jpg:large

I have a question to aero guys :
but when you mount this kind of machinery (in this case overlapping the rear wing plates) you don't have changed the flow you are trying to measure ?

No, the pitot tubes are on the front part of the grid so they measure the air pressure before it is altered by the grid

[zioture]

Complete gallery here http://www.newsf1.it/photos-formula-1-t ... ay-2-3038/

[.poz]

AMUS is suspecting some kind of trickery in the floor due to different texture of the carbon fibre.

I would agree that there is something due to the temperature stickers.

https://imgr3.auto-motor-und-sport.de/K ... 022292.jpg

Flexi floor? Are they even supposed to flex? Are they even allowed? Man this car is a beast.

IMHO they just moved the gearbox/transmission oil radiator from the back of the car into the sidepods with linking pipes into the floor

[seezung]

Wonderfull picture from above;

[matt21]

AMUS is suspecting some kind of trickery in the floor due to different texture of the carbon fibre.

I would agree that there is something due to the temperature stickers.

https://imgr3.auto-motor-und-sport.de/K ... 022292.jpg

Flexi floor? Are they even supposed to flex? Are they even allowed? Man this car is a beast.

IMHO they just moved the gearbox/transmission oil radiator from the back of the car into the sidepods with linking pipes into the floor

Could be correct indeed. =D>

[F1Krof]

https://www.motorsport.com/f1/news/tech ... te-880339/

Seems like it used for cooling, like the circuit boards. Still its nature remain mysterious.

[jagunx51]

Here is another speculation: Cables from/to batteries.

Cables to where? MGU-K/H are mounted to the ICE...

edit: adding picture

AMUS is suspecting some kind of trickery in the floor due to different texture of the carbon fibre.

I would agree that there is something due to the temperature stickers.

Edit: Could they run some sort of surface cooling? Maybe this helps reducing radiator size. Or even could influence the air flow.

https://imgr3.auto-motor-und-sport.de/K ... 022292.jpg

From test day #2

Different stickers locations, alignment, and blue stickers

[Mat-tes]

What is the red shape cut out on the left of the side-pod panel, to the left of the infor logo. Looks like a window with red tint (like some infra red lense) of some sort, could there be a camera of some sort placed there looking at the floor?
Let's speculate there is a camera, could it then be used to monitor the possible pipe that passes just in front of it, monitoring its temperature?
It's maybe a reflection, but from here it really look like a transparent surface.

If it's not that, then do some of you have any idea what it could be?

[matt21]

https://imgr3.auto-motor-und-sport.de/K ... 022292.jpg

What is the red shape cut out on the left of the side-pod panel, to the left of the infor logo. Looks like a window with red tint (like some infra red lense) of some sort, could there be a camera of some sort placed there looking at the floor?
Let's speculate there is a camera, could it then be used to monitor the possible pipe that passes just in front of it, monitoring its temperature?
It's maybe a reflection, but from here it really look like a transparent surface.

If it's not that, then do some of you have any idea what it could be?

Which part do you mean exactly?