Skip to content

tie radius arm on a f1 cars front suspenstion?

Here are our CFD links and discussions about aerodynamics, suspension, driver safety and tyres. Please stick to F1 on this forum.
manchild
manchild
12
Joined: 03 Jun 2005, 10:54

Post

Don’t rely on drawing I posted. I had in mind that for example on RBR upper front wishbone/cover is 250 mm wide and 80 mm thick. So, a stiffer/larger wishbones are what I had in mind while the sketch is mutation of actual pushrod system…
Top

Return to “Aerodynamics, chassis and tyres”