Re: Formula E
Posted: 01 Dec 2021, 12:34
Chassis tender document. Total (including driver) is 780kg. F1 2022 will be 792kg.Andres125sx wrote: ↑01 Dec 2021, 08:36Where´s the weight? Can´t find it
Chassis tender document. Total (including driver) is 780kg. F1 2022 will be 792kg.Andres125sx wrote: ↑01 Dec 2021, 08:36Where´s the weight? Can´t find it
No official spec on the car as far as I'm aware. I read something about 40% more regen in race thought!? There's more power but the capacity of the battery will be the same. It's more energy dense.Andres125sx wrote: ↑01 Dec 2021, 20:19Thanks!
I guess the weight reduction comes from the much more powerful regen so they can use a smaller battery
Any official data about the new battery?
Even if it was possible to reach 200mph, why would they? They're just increasingly using more power, and thus available energy to punch a hole in the air.
Testing finished last week.nokivasara wrote: ↑14 Dec 2021, 19:15Do they have winter testing in FormulaE?
I've decided to give FE one more chance and watch at least the first 2-3 races but it would be nice to know a bit more about the teams and cars.
A bit belated, I know, but I'd say that next year's Formula E cars will be a whole lot more exciting than this year's. Massive differences in the power to weight ratios and smaller dimensions should make them look much faster and easier to race too, hopefully.nokivasara wrote: ↑14 Dec 2021, 19:15Do they have winter testing in FormulaE?
I've decided to give FE one more chance and watch at least the first 2-3 races but it would be nice to know a bit more about the teams and cars.
I guess they'd use it when they need to overtake, but even then they probably wouldn't hit V-max.wesley123 wrote: ↑01 Dec 2021, 22:42Even if it was possible to reach 200mph, why would they? They're just increasingly using more power, and thus available energy to punch a hole in the air.
https://www.fiaformulae.com/en/news/202 ... -in-monacoDesign, engineering and production innovations for the Gen3 race car include:
Performance:
- Fastest Formula E car yet with a top speed over 322 kph / 200 mph.
- Most efficient formula racing car ever with more than 40% of the energy used within a race produced by regenerative braking.
- Around 95% power efficiency from an electric motor delivering up to 350kW of power (470BHP), compared to approximately 40% for an internal combustion engine.
- First-ever formula car with both front and rear powertrains. A new front powertrain adds 250kW to the 350kW at the rear, more than doubling the regenerative capability of the current Gen2 to a total of 600kW.
- Ultra-high speed charging capability of 600kW for additional energy during a race, almost double the power of the most advanced commercial chargers in the world.
- The first formula car that will not feature rear hydraulic brakes with the addition of the front powertrain and its regenerative capability.
Every aspect of Gen3 production has been rethought, redesigned and rebuilt to ensure the car sets the benchmark for high-performance, sustainable racing without compromise. For example, natural materials have been introduced to tyres, batteries and bodywork construction with life cycle thinking at the core.
Sustainability:
- Gen3 batteries are among the most advanced, sustainable batteries ever made consisting of sustainably-sourced minerals while battery cells will be reused and recycled at end of life.
- Linen and recycled carbon fibre will be used in bodywork construction for the first time in a formula car featuring recycled carbon fibre from retired Gen2 cars and reducing the overall amount of virgin carbon fibre used. This will reduce the carbon footprint of the production of the Gen3 bodywork more than 10%. All waste carbon fibre will be reused for new applications through adoption of an innovative process from the aviation industry.
- Natural rubber and recycled fibres will make up 26% of new Gen3 tyres and all tyres will be fully recycled after racing.
- The carbon footprint of the Gen3 has been measured from the design phase to inform all reduction measures taken to reduce environmental impact, while all unavoidable emissions will be offset as part of Formula E’s net zero carbon commitment.
- All Gen3 suppliers will operate in line with top international standards to reduce environmental impacts of manufacturing (ISO 14001) and be FIA Environmental Accreditation 3-Star rated.