Formula One car development blog

Williams also had its updates for Monza, the most specific of which being the simplified front wing. Contrary to the rest of the races, the FW30 did not have a bridge wing because the team didn't think they needed the extra downforce and drag.
The base plane itself is based on the pre-Spa configuration, indicating that the team was already going through the development before considering the new Spa front wing. The central deep spoon was left unchanged. On the other hand, the third ... Read more

Williams have introduced a new front wing at Spa, consisting of a more fluent spoon shape. The front wing used since Barcelona (upper image) had a wide central part unlike any other team. The newest version was undoubtedly better for the high speed corners of Spa but it remains to be seen if this wing will be used for the rest of the season. At the outer edges, the tips are curved up, similar to what was seen on last year's FW29.
Also marked in the image is the slightly different no... Read more

Just as most other teams, Williams have now also developed a downward extension to the sidepod panel. The approach differs from what is already on competing cars as the lower end does not directly connect to the barge board. Instead, the floor was extended to create a base for a connection point. On the upper side, Williams have also taken the chance to develop their sidepod panel further and enlarged it towards the front wheels.
All in all a very elegant solution to condition the t... Read more

Recently at Monaco, Williams and Toyota added winglets inside of their sidepod panels to add a bit of central downforce to their cars. When the panels were first introduced in Formula One - by Honda in 2006 - the inside winglets were fairly standard when most teams copied the design. Today, the panels are more focused on improving airflow and generating downforce at the rear end of the car. Monaco is however a special case, where due to its low speeds, aero efficiency is less import... Read more

Williams development is up to speed as new elements are rolling out of the factory quickly. At the Spanish GP, the team introduced a new front wing profile while at Turkey another step was made on the front wing. As a third car now, following Red Bull and Renault, the FW30 is being equipped with a shark fin engine cover. The solution is however more elegant and resembles more the version of BMW Sauber. While the added surface improves rear stability under yaw, the all new winglet fi... Read more

Williams have copied Renault's new upper deck front wing design, just two weeks after the French team first raced it. For Renault it was part of their Barcelona aerodynamic package that lifted the team's performance considerably. As marked in the image, the new wing sports small endplates where the nose bridge and the downforce generating panels connect. Despite being less aesthetically pleasing, the solution allows to put a more aggressive angle of attack to the upper elements whil... Read more

Williams continue to design their front wing independent of what the other teams are doing. The wing that was used in the first three races, as in the lower image, already was distinct as it featured a very smoothly curved base plane profile. This time around, the engineers left the bridge element unchanged, but changed all the rest. The Barcelona spec front wing sports 3 completely separate panels contrary to the previously half open main plane. Apart from that, the leading edge co... Read more

While the basic design elements are not new, the modern airbox wing on the FW30 is an excellent example of the current level of development in Formula One. Some teams are use very basic or no aerofoils in this area, but Williams appear to have put great effort in it. The image clearly shows a variation in chord along the width of the winglet. On top of that, the wingtip is slightly pointing upwards. The reason behind it is hard with any simulation, but any aerofoil in this area is i... Read more

Williams' new FW30 is a particular example for some trends that have been set over the winter. At first there is the attention that was paid to the sidepod panels. After their introduction in 2006 the designs have evolved greatly. The newest Williams iteration is very similar to the McLaren MP4-22 as it is one with the (closed) chimney and has a slit in the main panel itself. More rearward the flipup is rather conventional but shows similar thinking to rival teams. The flipup is now... Read more