McLaren MCL38

[f1rules]

[elldizzle]

Floor edge is crazy!..

[FittingMechanics]

[f1rules]

The original high res from mclaren
https://pbs.twimg.com/media/GG2FHzGXEAA ... =4096x4096

[FittingMechanics]

Is that something new at the rear wing? Seems like there is a small flat wing?

[the EDGE]

https://pbs.twimg.com/media/GG2G5EfWkAA ... ame=medium

It still looks like the pull rod connect below the chassis, can it be angled horizontally at the bottom somehow?

[f1rules]

[f1rules]

[organic]

Good angle of floopr edge

[f1rules]

[trinidefender]

Good angle of floopr edge

https://pbs.twimg.com/media/GG2LZhkWwAA ... &name=orig

Look at the vent on the lower side of the floor towards the back half of it. I wonder if airflow is going in or out of that vent

[organic]

Good angle of floopr edge

https://pbs.twimg.com/media/GG2LZhkWwAA ... &name=orig

Look at the vent on the lower side of the floor towards the back half of it. I wonder if airflow is going in or out of that vent

Highlight it please?

[Tomsky]

Good angle of floopr edge

https://pbs.twimg.com/media/GG2LZhkWwAA ... &name=orig

Look at the vent on the lower side of the floor towards the back half of it. I wonder if airflow is going in or out of that vent

Highlight it please?

[trinidefender]

Good angle of floopr edge

https://pbs.twimg.com/media/GG2LZhkWwAA ... &name=orig

Look at the vent on the lower side of the floor towards the back half of it. I wonder if airflow is going in or out of that vent

Highlight it please?

Look above the FAI rent~a~jet decal on the left side of the floor

[organic]

Look at the vent on the lower side of the floor towards the back half of it. I wonder if airflow is going in or out of that vent

Highlight it please?

https://i.imgur.com/UhfWpJk.jpeg

Not a vent but probably where they place telemetry equipment