[MVRC] Mantium Virtual Racecar Challenge 2020 (Grand Prix Cars)

[wb92]

I checked the mesh and weird values, but nothing unusual.

Edit:
When disabled CpT, Cp actually has managed to process... looking more into that

You can send me your case, I can also compare it against an old version of MFlow.

Thanks for that. I will let you know about sending the case. Theoretically I've found workaround for development purposes - takes bit more time and gives only CpT and Cp, but I can handle it as long as it will work for each case.

Funny. The latest case post-processed flawlessly. oO

However still the car is 1s off

Naah...i don't think anyone is lying because it's properly hard.
I have improved my car, but i struggled nonetheless. I've managed to improve it mainly because i'm spending way too much time for this competition

I'm legitimately considering sending my PhD back I'm so lost

I'm questioning my abilities as well with this project

[hollus]

This post got hung up in the queue. Reposting to ensure visibility.

Hi! Neither I... I signed up again too with the same team name, you can also delete the older account.. however I realized that I received only the email to set my password, and then I didn't receive no more mails..

Can I send my email address in order to let you add manually maybe?

thanks in advance...

[Ft5fTL]

Hi all,

Is there a posibility to work in Fusion 360 for this?

I'm using Fusion 360 and if i remember correctly Koldskaal also uses F360.

I use Solidworks

Ah my bad.

[LVDH]

So I have been looking into why so many teams never received an email and will have to send them all out manually, as no 2020 teams are in the list. Somehow something with the Mailchimp Wordpress connections seems to have failed. I will look into this but as I am not a web guy, it will take a while to fix.

[Alonso Fan]

Hi all. Unfortunately team SHM Racing is facing difficult times and would formally like to withdraw from this season until further notice. We hope to resume racing as soon as possible. Thanks to all for their efforts

[jjn9128]

Hi all. Unfortunately team SHM Racing is facing difficult times and would formally like to withdraw from this season until further notice. We hope to resume racing as soon as possible. Thanks to all for their efforts

Hopefully nothing too serious or covid related.

If you have a car you might as well enter. Who knows you might be in a better condition than you think.

[CAEdevice]

Hi, is it correct if the Linux version of MFLOW is called 2004 and Win version 2005? Is there any solver settings/mesh/bc changes from 2003?

[jjn9128]

Not really been making any gains anymore so this is the car I've submitted for the first round. AGR is the team.

[cecca98]

Wow! It looks very nice. I can't wait to see also all the cars.

The race is getting closer, but I haven't understood if the cars will be simulated (for the official time) with the normal or the long process. Results slightly change unsing one instead of the other... so I was wondering which one will be used

[variante]

Not really been making any gains anymore so this is the car I've submitted for the first round. AGR is the team.

https://pt1jqw.db.files.1drv.com/y4m68X ... pmode=none

Very interesting car, with many details i'm eager to see in action. For instance, i've never seen those curved floor edges.


Come on, everybody, show your cars...don't be shy

[jjn9128]

Very interesting car, with many details i'm eager to see in action. For instance, i've never seen those curved floor edges.

The outer edges or the front edge?

[variante]

The outer edges.
The front ones are interesting too, but they look like those used in Indycar, or those that are scheduled for 2022 F1 cars.

[jjn9128]

They help curl the air up and out from the outwashing VGs at the front of the floor. Seem to help me anyway.

[spacehead3]

Nice to see a fellow Onshaper though.

Do you use any special settings for .stl export from onshape?

[Koldskaal]

Not really been making any gains anymore so this is the car I've submitted for the first round. AGR is the team.

Nice! the floor almost looks ready for the "end of 2020" rules