Scuderia Ferrari SF16-H

[giantfan10]

Merc and RB also use push rod front suspension and run a combined lower wishbone. I get that Ferrari switched from pull rod, but for some reason they chose to abandon the idea. Aerodynamically it should be better to run a combined wishbone.

Well..... they obviously know what they are doing and im betting they have a good reason for abandoning it.

[Morteza]

SF16-H's rear wing support pylon does also intersect with the exhaust

[Nathanael F1]

Does anyone knows the stint times of Ferrari?

Those are in the testing thread.

[jetho]

Well..... they obviously know what they are doing and im betting they have a good reason for abandoning it.

Never doubted that. I was just wondering what their reasoning is.

[ricardo91]

My video of Sebastian Vettel testing the Ferrari SF16-H.

[Morteza]

[Vary]

My video of Sebastian Vettel testing the Ferrari SF16-H.

https://www.youtube.com/watch?v=fUmvzda ... e=youtu.be

Guys, it is possible that the sound during a turn (not the curbs), when the car isn't full throttle, is that hte engine is dieseling like some speculated in the last months?

[C Plinius Secundus]

My video of Sebastian Vettel testing the Ferrari SF16-H.

https://www.youtube.com/watch?v=fUmvzda ... e=youtu.be

Guys, it is possible that the sound during a turn (not the curbs), when the car isn't full throttle, is that hte engine is dieseling like some speculated in the last months?

Well, I've thought it was more like a traction controlish sound, how it pulsates going into the corners, like in this video posted by MrG yesterday, and some other videos on the web.

[bhall II]

A brief aside...

It's kinda funny to me how SF16-H looks like an evolution of F14 T instead of the followup to SF15-T.



A bit of vindication for Tombazis?

[turbof1]

No. Just try that with every current F1 car and paint it red, and you'll notice they all will be very similar regardless. For further discussion about this, please refer to the car comparison topics.

[zioture]

Comparison noise @MercedesAMGF1 VS @ScuderiaFerrari

[f300v10]

Ferrari testing serrated tire squirt vane:



Via @Graftechweb on twitter

Edit: McMrocks is correct. The lighting caused the piece to look serrated when it was not.

[McMrocks]

This guy is mistaken. It is just the pattern of the CF

[dot235]

Comparison noise @MercedesAMGF1 VS @ScuderiaFerrari

https://www.youtube.com/watch?v=FMoEp1ordx8

That video is misleading, this is how Merc really sounds like:



It has the similar "tractorish" sound when coming out of turns.

EDIT: time linking didn't work for some reason. Skip to 1:20.

[domh245]

I think the tractoring sound you are hearing in that video is from the Kerbing.