[MVRC] Mantium Virtual Racecar Challenge 2023 (Grand Prix Cars)

Post here information about your own engineering projects, including but not limited to building your own car or designing a virtual car through CAD.
User avatar
yinlad
28
Joined: 08 Nov 2019, 20:10

Re: [MVRC] Mantium Virtual Racecar Challenge 2023 (Grand Prix Cars)

Post

LVDH wrote:
12 Feb 2024, 09:05
It seems to me that some kind of rubberband rules make championships "better" but I really do not like them. But if there are good ideas, I am happy to listen.

In any case, I have launched the new season:
viewtopic.php?t=31555
Title of the new thread is 2023 also, by the way
MVRC - Panthera

User avatar
hollus
Moderator
Joined: 29 Mar 2009, 01:21
Location: Copenhagen, Denmark

Re: [MVRC] Mantium Virtual Racecar Challenge 2023 (Grand Prix Cars)

Post

Fixed!
Rivals, not enemies. (Paraphrased from A. Newey)
Be careful with “us”, can’t have us without them.

Busor
Busor
0
Joined: 09 Jul 2023, 22:21

Re: [MVRC] Mantium Virtual Racecar Challenge 2023 (Grand Prix Cars)

Post

G-raph wrote:
03 Feb 2024, 00:53
I've just noticed there is a nasty gap at the back of the front brake duct scoop, leading to very poor mesh. Probably worth fixing for 2024.

https://i.postimg.cc/X7G70fg6/Capture.jpg
I think something similar is created between the rear suspension and the volume for the wheel winglet. Not a problem for the mesh, but technically you are not allowed to connect the winglet to the wheel over this gap (seen from behind the car):
Image
Busor

User avatar
LVDH
46
Joined: 31 Mar 2015, 14:23

Re: [MVRC] Mantium Virtual Racecar Challenge 2023 (Grand Prix Cars)

Post

hollus wrote:
12 Feb 2024, 16:52
Fixed!
Thanks.


Busor wrote:
12 Feb 2024, 23:13
I think something similar is created between the rear suspension and the volume for the wheel winglet. Not a problem for the mesh, but technically you are not allowed to connect the winglet to the wheel over this gap (seen from behind the car):
I guess these issues happened when adjusting the suspension settings from the initial position. I have it on my todo list now. Thanks and lets post issues like this in the 2024 thread from now on.