CFD - Computational Fluid Dynamics, Motorsport, Formula 1

[schumiGO]

HI Guys))
Is here some guys with a little bit fast domputer )) Cose when i flow in FlowWorks 2000 one wing it was 3 hours)))

Maybe some FLUENT guys here can do it) for fun))
This rear wing))
compare with)) LOL LOL!!
))
Just for fun?? Who want to flow model)) send MSN
schumigogogo@hotmail.com
149873562

i'll send model for flow))
Contac me any case if you are interesting in CFD

[Guest]

You might want to contact rough_wood or CFD_Russ to run some CFD on it; don't know their emails on the top of my head.

West

Nice job. Looks like a mix of the Ferrari extended endplate w/ the Toyota cutouts; I would love to see both effects.

[Guest]

Hi )) First attempt))
Do not kill me ))) Just LOL ))
Only velosity))











LOL )) Who can say anytjing while looking to this pictures)))

Good luck((
Sorry but i couldn't calc downforce
Maybe next time.... or you know how to do it.....

SOlid Works 2001 FlowWorks2000 + Athlon 900+256MB PCI + 64 MB video

Cal time 7 hours(!)!!!! Number of elements 455 000. 260 iterations(((

[schumiGO]

Forgot add .....

air flow to wing 70m/s = 252 km/h

[hardhgear]

Hello
I finished the first step in the project pleas if any one has a comment or something pleas contact me .
I want to know if there is any mistake or something.

http://mabdelmoniem.netfirms.com/Projecs/FW.htm

http://mabdelmoniem.netfirms.com/Projec ... ies-04.jpg

http://mabdelmoniem.netfirms.com/Projec ... ies-05.jpg

[West]

What are those triangles doing there?

[Guest]

What triangles r u talking about?

[Steven]

I think he's pointing to the triangles that show the direction of the airflow
(at least I think they do so )

[hardhgear]

If any one can find something wrong or other thig pleas tell me.it's my first time

[hardhgear]

I'll module new shape near to the shape the used in the cars these days and publish it

[McLaren_Fan17]

Hello all. I am a High School junior from Indiana. I am the captain of a team at school where we design and build a car to get maximum fuel mileage using a 3.5 hp Briggs engine. We used an aluminum tube frame with a fiberglass body. We only got 614 mpg and need about 1000 to win the competition. Here are some of the CAD models of the car. If someone would be able to CFD it or just give some input on the design for next year, that would awesome.

<img src="http://tinypic.com/4v32w9" alt="Image hosted by TinyPic.com">

<img src="http://tinypic.com/4v332p" alt="Image hosted by TinyPic.com">

<img src="http://tinypic.com/4v333s" alt="Image hosted by TinyPic.com">

[ReubenG]

While it's strictly not F1 related (hence should be elsewhere in the forum) I must say I am fairly impressed with the level of design presented here. I would be pleasantly surprised to see work of this level from some of the undergradaute engineering students I tutor.

As regards the improvement of your design, I noticed you are running a fairly large final drive sprocket.
i) Given that you are only running a 3.5 bhp engine, and a very lightl vehicle, I don't see you putting a phenomenal amount of torque into the final drive. I've done some FEA work on minimising sprocket mass for Mini Bajas - private message me your e-mail address and I'll send you some of the pics. I f you send me the torque going into your final drive, sprocket material etc and the relevant dimensions (Sprocket pitch diameter, shaft / coupling diameter etc) I might be able to run it thru my model and give you a more optimal design. For any motorsport application one cannot emphasis the reduction of rotating mass enough.
b) How did you arrive at your final drive ratio? I can't see the sprocket leading up to the final drive from the pics, but just looking at the size of the final drive sprocket it looks like a fairly big ratio. (all my transmission modelling is based on acceleration/top speed optimisation rather than efficiency) Why do you need such a huge final drive ?

[schumiGO]

Good car)))
Fantastic bodywork))
I can flow it in floworks)) But i can't say that my results well be accurate for 100% .. 90% Is possible))

If you have SolidWorks 2003 or 2001 file )) no problem)))
I think after one night i'll have some results))


Best reagards ))

Sorry guys for for my REAR wing(( It was my first attempt )))

Next time i calc forces)) i promise)))
Schumigogogo@hotmail.com

or fo huge files))
phys.msu@gmail.com

[schumiGO]

Sorry mate)) i saw this car and want to add smth))

If smb give me such car and said "must drive 1000"
The 1 think i started to do was finding out resisting place in this car...
If we can't increase HP we can decrease HP loose in resistent part

1) Tires.. have to use maximum hard tires and preesure or w/o air tires!!
2) Brake caliper and disk there some power lose.... sure you can put some oil to disc))))))) i did it if iwas in you plase))
3) Put holes in everithing that you can)))) I'ts realy help decrease mass..
(steering rock,final drive, driver seat , sreerin wheel must be full of holes )
4) if it possible do mass distribution from left and right like 50% 50%
5) Use very young and little-mass driver)))
I belive you win this competition


Best regares!! CU

[schumiGO]

Realy FUN and LOL
Realy Zero approximation of Ferrari wing
Sero approx= 2 l of beer one evening and 20 min of work)) Any you reaky can see like Zero Approx)))

Air flow 70 m/s= 252 km/h
For sure i calc drag and downforce
28 kg=drag
6kg=downforce

But this is a little wing 490 mm between endplates next time must be real F1 wing)) So )) don't see to absolute values))

And i fogot cut calc region so the end of nose guve such huge drag force and drug/down parametr is'n correct( But next time be best)