Red Bull RB20

[Andi76]

Im going to wait until Bahrain but they certainly were not conservative, contrary to what Horner Adrian and Waché were saying..

I would say they indeed were conservative, because apart from the sidepod inlet it's actually a very conservative evolution. And I doubt whether Over instead of Underbite will change that.

[KimiRai]

[AR3-GP]

Im going to wait until Bahrain but they certainly were not conservative, contrary to what Horner Adrian and Waché were saying..

I would say they indeed were conservative, because apart from the sidepod inlet it's actually a very conservative evolution. And I doubt whether Over instead of Underbite will change that much.

The nose, sidepod inlet, engine cover are very different and we haven't seen the floor yet. I can't see how this is conservative.
RB18-> RB19 was conservative.

[GrizzleBoy]

Makes sense for it to be there in a high pressure area.

[Vanja #66]

In which case, they could have a faucet shaped inlet. See below.

https://i.postimg.cc/Y9wQw2KH/rb20-inlet.jpg

Aerodynamics isn't magic, there are rules and those who understand them fully make these fastest cars on the world. That would be against all rules

[kfrantzios]

https://i.postimg.cc/9QHKCJhk/rb20inlets.png
There they are... if the model is correct...

Actually you can modify the renderer.
1. visit the page: https://www.redbullracing.com/int-en/cars/rb20/
2. hit F12
3. find the <model-viewer html element (or search for min-camera-orbit=)
4. change its value to min-camera-orbit="auto 124deg 28deg"
5. you can now see under the car

https://ibb.co/x5hbycg
https://ibb.co/0XKtNPM

In the off chance they remove this from the site I've remixed a model-viewer demo on glitch with the RB20 files here: https://rb20-model-viewer.glitch.me

Great Job!

[Andi76]

Im going to wait until Bahrain but they certainly were not conservative, contrary to what Horner Adrian and Waché were saying..

I would say they indeed were conservative, because apart from the sidepod inlet it's actually a very conservative evolution. And I doubt whether Over instead of Underbite will change that much.

The nose, sidepod inlet, engine cover are very different and we haven't seen the floor yet. I can't see how this is conservative.
RB18-> RB19 was conservative.

Thats is pretty much the case with every car... and most teams changed even more than Red Bull. So i think its still a conservative evolution indeed.

[SICK AL SPEEDSHOP]

here you can compare RB19 with RB20 (fake/dummy)

https://de.motorsport.com/f1/news/vergl ... /10576326/

here are some more pictures of the presentation

https://www.motorsport-magazin.com/form ... 061,0.html

after most teams now showed some show cars that could look like the 2024 race cars, I still cant wait to see the Williams concept

[f1jcw]

If those inlets are real, either they have some impressive cooling system or some Hondas are going to go boom

[GrizzleBoy]

Actually you can modify the renderer.
1. visit the page: https://www.redbullracing.com/int-en/cars/rb20/
2. hit F12
3. find the <model-viewer html element (or search for min-camera-orbit=)
4. change its value to min-camera-orbit="auto 124deg 28deg"
5. you can now see under the car

https://ibb.co/x5hbycg
https://ibb.co/0XKtNPM

In the off chance they remove this from the site I've remixed a model-viewer demo on glitch with the RB20 files here: https://rb20-model-viewer.glitch.me

Great Job!
https://i.postimg.cc/QdPbjM1d/rb20inlets4.png

Are RB still the only team to have the inside of the floor entrance lip lower than the outside?

[KimiRai]

[Andi76]

If those inlets are real, either they have some impressive cooling system or some Hondas are going to go boom

Actually they look not much smaller than last years on some pics. The true size will only be seen in the tests and I bet that they will actually be similar to those of 2023. Everyone is just boiling water and no one can do magic.

[AR3-GP]

https://i.imgur.com/Qb1eZEQ.png

It's interesting that Rb have still hesitated to pursue any waterslide treatment. I suspect that water slides are a big drag penalty.

The "bump" in yellow is interesting...

[mauricienne]

Actually you can modify the renderer.
1. visit the page: https://www.redbullracing.com/int-en/cars/rb20/
2. hit F12
3. find the <model-viewer html element (or search for min-camera-orbit=)
4. change its value to min-camera-orbit="auto 124deg 28deg"
5. you can now see under the car

https://ibb.co/x5hbycg
https://ibb.co/0XKtNPM

In the off chance they remove this from the site I've remixed a model-viewer demo on glitch with the RB20 files here: https://rb20-model-viewer.glitch.me

Great Job!
https://i.postimg.cc/QdPbjM1d/rb20inlets4.png

do you really think RB will show on the 3d the part they want to hide? Stop to think you are more clever than them!

[CHT]

The red bull on the engine cover has become alot smaller. Fin is also missing