BAR Honda 2002 chassis 09 rebuild

[thestig84]

Hi. I have enjoyed Showcar Kevs builds on here along with F1Pilot and his 2001 BARs.

Been a dream of mine to have a go so have taken the plunge and bought a 2002 BAR 004/009 chassis.

I am not collecting for a while but just putting the message out there for any info, contacts or suitable parts anyone might have. Will update when collect and make progress.

Much appreciated!
Adam

[thestig84]

Bit of an update. I had the pleasure of visiting Ron at GPcars4sale. He had a fair few extra BAR Honda bits (along with my tub). Quite a few are a bit too new for my car (050-060) but I did get a decent pile of parts to get me going (rear wing not pictured).

Just cleaning bits up today. The front wing endplates are 020 (year 2000) if anyone has 2002 versions that they would swap that would be handy. These will do if I cant find anything else. I'm pleased with the correct rear bodywork, wishbones and T-tray!
Cleaned up rear bodywork


Also couple nice cockpit items:


I am going to improve the dummy wheel. Perhaps a different display, paddles, quick release hub and alcantara (help hide some of the fake carbon!) H Honda logo in the centre too.

Really good to meet Alex from Pitlanespares.com and collect an A1GP steering column. Looking forward to seeing more parts they have in the future!

[Stu]

Best of luck Adam, it’ll be fun to follow the build.
Do you know the history of the chassis?

[thestig84]

Thanks Stu.

Yes during the 2001 season it was a spare car for Silverstone, Magny Cours, Hockenheim, Hungaroring, Spa-Franchorchamps, Monza and Indianapolis. It made its only race appearance at the Nürburgring for JV after he called his race car undrivable in qualifying!

[coaster]

I pray it gets a V10, Judd 4.0 seems to be the most plentiful and serviceable.

[thestig84]

Sorry to disappoint but it will just be a roller. Just making it a roller is already a big enough project.

Kudos to the guys that get these running again but unfortunately I am a long way from operating in those circles!!

[thestig84]

Small update. Wheel is a little project while waiting to collect tub. I cut away some of the back plate of the wheel to fit the centre control panel. Also looking at the real wheel from that era I have swapped the talk button for a switch. Installed 4 inserts that small allen bolts thread into and secure the front panel. Added a Honda H logo in the centre also.

[coaster]

Will the car be on the floor?
Some collectors wall mount rollers, nightclubs often bolt champ car rollers to the ceiling so that drunks cannot meddle with the car.

[thestig84]

Yes it be on the floor, not sure I would call it a roller if plan was to mount it somewhere.

[thestig84]

Little bit more work on the wheel. Alcantara went on quite well, not perfect up close but not too bad.

New black piece of acrylic that is a lot more like the real wheel (pic below) now hides a 3d printed housing for 2 led displays. The left is a gear display that is wired up to the MIX rotary displaying 1, 2, 4 or 4. Throttle position 4 brings up a 0. The right display is volts and amps. Its just a little feature to add an extra dimension to the wheel. The quick release hub, 3d printed paddles and connectors are ready but will have to wait for the chassis to make sure I get the mounting position correct.

[Hutchie.91]

A few pics of the wing profiles would be really nice! Awesome project.

[coaster]

Schmee has the FW19 showcar 1, in his most recent youtube he ponders bolting it to the wall or the roof, a luxury car dealer in Melbourne named Lorbek has an F2003GA showcar seated on a mezanine overlooking the showroom, i sure would love to run a hand held 3d scanner over the F2003.

[thestig84]

A few pics of the wing profiles would be really nice! Awesome project.

Thanks. I have some drawn wing profiles sent from a 2001 03 chassis owner if that is of interest to you? My wings are a bit of a hotchpotch of various years so wont really be an accurate representation. Still looking for a front wing main plain too.

[thestig84]

Schmee has the FW19 showcar 1, in his most recent youtube he ponders bolting it to the wall or the roof, a luxury car dealer in Melbourne named Lorbek has an F2003GA showcar seated on a mezanine overlooking the showroom, i sure would love to run a hand held 3d scanner over the F2003.

Yes I have seen the videos his the Williams showcar. The seller of my chassis sold a complete version of my 040 a few weeks after mine, its destination was a roof in U.S.A. Seems a popular idea, ok for a show tub but a bit of a waste of a real chassis imo.

[Hutchie.91]

A few pics of the wing profiles would be really nice! Awesome project.

Thanks. I have some drawn wing profiles sent from a 2001 03 chassis owner if that is of interest to you? My wings are a bit of a hotchpotch of various years so wont really be an accurate representation. Still looking for a front wing main plain too.

Sure! Absolutely love seeing cars of my favourite era in more detail and anything like that will always be of interest to me. My day job has anything from the 2010 and onwards covered in terms of CAD/CFD so any chance for stuff from the early 00's is always a special treat.