OK, lets see what Autosport has to say on the matter in the article you quoted in your OP.WhiteBlue wrote:How do you brake if there is no hydraulic line from the brake pedal to the wheel hub. I'm just saying that it makes no difference if you connect the hydraulic strut cylinder and the brake pressure line or if you have a non fluidic transmission between.
.....However, if the drivers were changing the ride height of the cars under braking then that would be a breach of the rules.
Article 3.15 of the F1 Technical Regulations states: "With the exception of the parts necessary for the adjustment described in Article 3.18 [the DRS], any car system, device or procedure which uses driver movement as a means of altering the aerodynamic characteristics of the car is prohibited."
AUTOSPORT can reveal, however, that the adjustment to the ride height - which improves aerodynamic performance and stability on the Lotus under braking - does not come from the driver.
Instead it is reactive to brake torque and is linked directly to the suspension - so cannot be classified as a moveable aerodynamic device in the way that independent mass dampers were.
Anyway, setting aside legalities, lets look at the practical consideration.
The amount of correction to the nose needs to be in proportion to the deceleration. If the system is linked to the reaction of the wheel hub to the deceleration (ie brake torque) then it will always be proportional to the deceleration of the car.
If the system is linked to the pressure of the driver's foot then the system would apply the same force regardless of the car's deceleration.