Intake Valve and Feliks' ideas

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

[quote name='Wuzak' post='5587386' date='Mar 15 2012, 08:26']Will sufficient heat be generated in the exhaust to be used ina combined cycle situation?[/quote]

Yes, combined cycle, but also the latest trends ...
http://www.gizmag.com/thermoelectric-ca ... mpg/10928/

And since it has to work at the coal face powder (same what they use today's power plants for combustion in boilers).
can seals with carbon, similar to the scrubbing of electric motors
http://hariramco.com/carbon-brushes.html

http://www.dpaonthenet.net/article/4712 ... ssors.aspx

Star engines were characterized biggest always force density

Image

Image


Below picture of the star half rotate around 10 (40) with "cylinders". for the transparency of the picture one can see only 3 additional "cylinders" more than is at the animated film.
One can also see dimensions of the whole of the engine in the assumption that every cylinder has such dimensions for the picture half rotate with the set connecting rod of the Sulzer D= engine of 900 mm and stroke 2500 mm .

Image

So 10 (40) "cylindrical" engine half rotate about the same working capacity in comparing to the Sulzer 10 engine cylindrical on the picture below .

Sulzer: 10 Cylinders 20 m long , 15 m hight , 1500 Ton weight

Half rotate star : 10(40) "Cylinders" 4,5 m diameter , 4,5 m long
about 70 ton weight.

Image

And most importantly.. Since in the engine half rotate mass innertia are several times Sulzer smaller than in the engine, engine half rotate can work with the much greater rotation speed.
Slzer : 102 RPM 60 000 KW

Half rotate 250 RPM 150 000 KW

In same intake work volume .

And now, the efficiency of the engine, due to the friction of the walls of the cylinder to rise about 5%. That is, it is the most efficient machine for the heat, whose efficiency exceeds 50% of the.

http://www.theoildrum.com/node/2249
Regards Andrew: :D

Anth
Anth
0
Joined: 02 Apr 2011, 09:24

Re: Intake Valve and Feliks' ideas

Post

Wonderful

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

http://www.powermag.com/blog/index.php/ ... -in-japan/

Fear think about what would happen, if not given these five cents....

Andrew :wink:



Is it possible Tsunami from the Mainland ???

Yes of course ...

As such, things appear to the local river.....


Image

Wishing you to never be so does not become.

anxious Andrew #-o

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post


User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

http://www.guardian.co.uk/world/video/2 ... ctor-video
17 March 2011

And faith in the power of the defence forces....


Defence force always better than the force of reason...



http://enenews.com/high-radiation-level ... -fukushima

Whether the IAEA supports still so cooling reactors, or changed the sentence. ??

Andrew #-o #-o

User avatar
coaster
16
Joined: 30 Jun 2012, 05:10

Re: Intake Valve and Feliks' ideas

Post

Um,you could cram alot of poppet valves in the space - sure.
I will be interested to sure if anybody gets it running.

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

[quote=Feliks]Nice look at the animation:

http://www.javys.sk/en/nuclear-faciliti ... el-storage

Andrew[/quote]

And my animation, showing what you can do in 4 Fourth swimming pool in Fukushimie.
You need to build a new building, to the basement of the reactor building to insert with three new reactors, only to store the fuel. They manage any guarantees when possible earthquakes.After filling all the water also will be a guarantee of the & span settlement.

Image


Andrew #-o

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

Whether engineers will pretend that the atomists still do not know the new inverter UPS Technology on batteries, which in the case of a power failure, it is ready within fractional seconds to the provisioning of the full effect of emergency systems ???
Of course, some diesel then can long function.

But I think, with this reason for savings, because and so nuke is already insanely expensive.

http://www05.abb.com/global/scot/scot23 ... _rev_c.pdf

Andrew :D

May repulsion to techniques derived from green energy does not permit widely its integrity in nuke ... :roll:

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

Monument to the victims of the earthquake in its epicentre in Tashkent. You can see clearly the huge cavity, in which the trees are growing, and despite their vertices do not protrude above the ground of the monument, the cavity is approx. 50 m depth.
And talk to someone it does not appear that build the atomic power stations on earthquake-resistant, ...Jan Christian Andersen Fairy Tales. ...
I have seen. I recommend a trip atomist engineers in particular.

Image


Andrew :(

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

In order to provide the reactors in Fukushime from the bottom you have the mechanical tunnel.
Then insert the two meters in diameter with 20 tubes. , Do the holes from the top and side, and on the bottom line fire resistant ZrO2. For large pipes enter the small tube to remove radioactive leaks or cooling corium had reached there...


http://www.herrenknecht.com/fileadmin/r ... -12-21.pdf

http://www.herrenknecht.com/fileadmin/r ... -10-29.pdf


Image

Certainly not the cheapest, but it will give guarantees that the radioactive materials do not enter the land and ocean

Regards Andrew :(

zonk
zonk
69
Joined: 17 Jun 2010, 00:56

Re: Intake Valve and Feliks' ideas

Post

swietna robota

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

Can to remove scrap metal from the reactor 3 can use these electromagnetic grippers?
Also for attaching various devices and cameras probably would be useful..
Image

Image

Andrew
:roll:

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

Whether, if the sprayer to the treadmill, for example, a car, it will be more supportive of animals?


http://en.wikipedia.org/wiki/Horse_mill

Image

Andrew :roll:

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

I wonder if to ask if these two smiling at us men to graciously evacuated their asses out of this car, it would be possible instead of carriage them to produce some electricity for us? Since drivers are not needed, because the car is harnessed to the treadmill and drivin in circles .. But one thing is certain, that such a vehicle driving the external energy, we will have the wind, regardless of the weather ... AJ is here the energy produced is sufficient to maintain the treadmill speed, it will be good .... And maybe even a few kilowatts for us is for our use ....
And it is always, regardless of the weather ... I do not need to go to the desert to breaking records. This can be done on the treadmill near the house...

http://www.youtube.com/watch?v=bkcn8ZkvKKc&feature=plcp

http://news.discovery.com/autos/how-do- ... 11207.html

Image


Image


Andrew

User avatar
Feliks
6
Joined: 12 Sep 2007, 10:10
Location: Krakow,Poland

Re: Intake Valve and Feliks' ideas

Post

Finally, heavy equipment, the 21st century as far as technology began to be used ..


Image

http://www.youtube.com/watch?v=H2n93pCE ... r_embedded


Andrew :D