raymondu999 wrote:How exactly does KERS help with traction? Honest question. Are you suggesting that they're reversing the KERS motor direction to hold back the forwards torque?
My friends and I were throwing this around earlier in the year. Engage the KERS generator at increasing resistances to limit engine torque seen at the wheels. We settled on a system that we termed an eletromagnetic torque management system.
The engine torque demand requirement is seemingly being observed (engine is producing the torque requested by the driver), it is simply the torque is being split between the KERS and the drivetrain. As long as the KERS unit observes the required limitations it should remain legal. Excess energy could be "bleed" off as heat and then heat is the main issue which may have led to the failures of the RBR KERS systems seen previously.
The kinetic energy recovery creates a resistance in the drivetrain which can be used to limit torque to the rear wheels. The upshot is increase exhaust energy as the engine is under greater loads on corner exit. Good for an EBD....
We were absolutely not certain, however we thought that there is nothing in the regs that would/could prevent the charging of the KERS system under acceleration. It is simply a kinetic energy recovery system. The how and when seemed indeterminate.
If you could cycle the charging on and off fast enough and at the correct frequencies and timing to alter the torque split between the drivetrain and the KERS system, you could possibly alter the torque seen at the wheels to your advantage.
Is it possible and would it work?? I have no idea!!! I'm not an electrical engineer and don't know for certain but it seems somewhat plausible if difficult. Maybe those more in tune to these systems may have a better idea.
Never approach a Bull from the front, a Horse from the back, or an Idiot from any direction