That must worth a couple thousands of a second.beelsebob wrote:They're not new - they're just painted greenSiLo wrote:You're going to need to point out these new VG's to me. That wing is exactly the same.
That must worth a couple thousands of a second.beelsebob wrote:They're not new - they're just painted greenSiLo wrote:You're going to need to point out these new VG's to me. That wing is exactly the same.
Only if they are polished for a couple of hours like what the Rolex ad says.stefan_ wrote:That must worth a couple thousands of a second.beelsebob wrote:They're not new - they're just painted greenSiLo wrote:You're going to need to point out these new VG's to me. That wing is exactly the same.
You mean flexing? Possible, but not the main purpose. The vertical strakes intend to guide air outwards, in order to get as little air as possible/reasonable in contact with the tyre. This both reduces wheeldrag and wheel turbulence messing up airflow underneath the front wing.monsi wrote:Do all those curved vertical strakes on the top of the wing produce a pronounced twisting moment, tending to bend the outside of the wing up and the centre down at speed ?
They are there to help turn the airflow outward of the front tyre.monsi wrote:Do all those curved vertical strakes on the top of the wing produce a pronounced twisting moment, tending to bend the outside of the wing up and the centre down at speed ?
http://www.f1technical.net/features/19180atanatizante wrote:http://imgur.com/7yrI65m.jpg
What`s the purpose of this "fence" or Gurney wing in this area ?
http://i.imgur.com/xRrl070.jpg
Mercedes added a small inverted gurney flap right on top of the element (highlighted in light blue) and also right in front of the tire. Air underneath it gets blocked, creating a rotating flow structure. This will push the rest of the air much higher, again to ensure minimal interference from the tire. They aid this process with what must be the most twisted carbon fiber piece on the grid (yellow). This piece spans over the 2 uppermost elements and together with the endplate boxes in airflow in the path of the tire, separating it completely from the other airflow.
I don't think there was a question about it in the fist place.Ferraripilot wrote:The vanity cover is exposed above the front suspension in the below pic. This certainly confirms the system is not entirely hydraulic.
http://i59.tinypic.com/2hhiv5h.jpg