Scuderia Ferrari SF16-H

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
Juzh
161
Joined: 06 Oct 2012, 08:45

Re: Scuderia Ferrari SF16-H

Post

Thanks.

User avatar
Mr.G
34
Joined: 10 Feb 2010, 22:52
Location: Slovakia

Re: Scuderia Ferrari SF16-H

Post

Image

It's probably only the camera angle, but from this pic it looks like different break ducts for left and right side.
Art without engineering is dreaming. Engineering without art is calculating. Steven K. Roberts

giantfan10
giantfan10
27
Joined: 27 Nov 2014, 18:05
Location: USA

Re: Scuderia Ferrari SF16-H

Post

2016 Token usage:
Ferrari 23 used 9 left
Mercedes 19 used 13 left
Renault 7 used 25 left
Honda 18 used 14 left

f300v10
f300v10
185
Joined: 22 Mar 2012, 17:13

Re: Scuderia Ferrari SF16-H

Post

This may have been present since the launch of the car but I haven't been able to find a good photo to compare with. Is this large 'channel' in the center rear of the floor where the reference plank is new?

Image

fawe4
fawe4
7
Joined: 24 Jan 2014, 16:26

Re: Scuderia Ferrari SF16-H

Post

It's been the same for some time now. With risen gearbox it's just more pronounced.

User avatar
ringo
230
Joined: 29 Mar 2009, 10:57

Re: Scuderia Ferrari SF16-H

Post

I think some amount of cooling can be sent back through those floor channels. There may be a cooling outlet under the engine cover.
For Sure!!

mkable1370
mkable1370
4
Joined: 14 Nov 2013, 22:29

Re: Scuderia Ferrari SF16-H

Post

Can anyone explain what this apparent metal strip is ? Thank you.
Image

wesley123
wesley123
204
Joined: 23 Feb 2008, 17:55

Re: Scuderia Ferrari SF16-H

Post

DiogoBrand wrote:
bhall II wrote:What part of this...
The idea is to minimize air flow over the sidepod, where it would generate lift, and instead direct it around the sidepod, which is a route to the back of the car that doesn't generate lift.
...even so much as hints that air flow over the sidepod is, or can/should be, stopped?

Does this look right?

http://s8.postimg.org/567xk0zar/stop_si ... y_road.jpg

:lol:

All that stuff about the airflow conditioners being there to clean airflow / energize airflow to keep the sidepods from stalling / redirecting airflow for downforce related purposes is probably right. It's not that your explanation didn't make sense, but to me there doesn't seem to be an efficient way to prevent airflow over the sidepods from generating lift, due to their shapes.

But I can never say anything for sure, my work as an aerodynamicist is limited to studying the effects of airflow over my hand outside the car window.
imo it's the same as with the fenders on a LMP(or any other car) they generate lift by default, so he aim is to reduce the lift.
"Bite my shiny metal ass" - Bender

ferkan
ferkan
31
Joined: 06 Apr 2015, 20:50

Re: Scuderia Ferrari SF16-H

Post

Thats interesting POV, but Ferrari was a team that historically brought most updates in last few years. Trouble is, very little of them worked :mrgreen: Allison already said last year that they are shooting for strong base, and then updates that won't be introduced every few races like they used to be. Their aero dept work seemed to be scattered on all fronts with no clear vision, so IMO seeing Ferrari is not rushing with updates and seems upbeat with car would point to that actually being a good thing.

"Untapped potential" "Few new updates so we will see how it goes then.." are well known things TPs say when car is not as good as they were hoping for.

giantfan10
giantfan10
27
Joined: 27 Nov 2014, 18:05
Location: USA

Re: Scuderia Ferrari SF16-H

Post

From moderator Aral. Please not that this thread is in relation to the mechanics of the SF 16-H. Off topic comments about the looks of the car have been removed.

bhall II
bhall II
477
Joined: 19 Jun 2014, 20:15

Re: Scuderia Ferrari SF16-H

Post

giantfan10 wrote:Some people just seem to think that newer has to mean better because its new right? lol
Like the folks who repeatedly tout Ferrari's new chassis? :wink:

In all seriousness, and with regard to the general (off) topic under discussion, how a car looks can be very deceiving, which is why it can only prompt questions, not answers.

For instance, despite the presence of components that appear to have been developed significantly during the offseason...
grandprix.com wrote:"We have improved but it was not enough," Button said in Melbourne ahead of the 2016 season opener.

"Reliability is much better but there is still work needed with outright power and overall downforce."

The 'downforce' comment is an obvious reference to McLaren's chassis, and teammate Alonso agrees: "Reliability has been very strong, which is good because now we can work on the overall power between races."

But he added: "We are still far away aerodynamically in order to fight competitively."
Let us return now to the underdeveloped SF16-H.

User avatar
AnthonyG
38
Joined: 03 Mar 2012, 13:16

Re: Scuderia Ferrari SF16-H

Post

Anyone got a picture of the new (rumoured) Ferrari front wing?
Thank you really doesn't really describe enough what I feel. - Vettel

User avatar
ME4ME
79
Joined: 19 Dec 2014, 16:37

Re: Scuderia Ferrari SF16-H

Post

AnthonyG wrote:Anyone got a picture of the new (rumoured) Ferrari front wing?
http://www.motorsport.com/f1/news/giorg ... gp-680347/

Image

imightbewrong
imightbewrong
17
Joined: 07 Aug 2008, 16:18

Re: Scuderia Ferrari SF16-H

Post

AnthonyG wrote:Anyone got a picture of the new (rumoured) Ferrari front wing?
Some photos from friday:
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

GrndLkNatv
GrndLkNatv
1
Joined: 03 Oct 2007, 18:31
Location: Northglenn, Colorado

Re: Scuderia Ferrari SF16-H

Post

Timpini doesn't take photos, but my buddy E. Colombo's guys still do and I post each race's photos on my facebook page..
Timpini is the rear jack man and mechanic..

https://www.facebook.com/Ferraristi

dot235 wrote:
GrndLkNatv wrote:
Rhodium wrote:https://pbs.twimg.com/media/CcigPFTWAAA5heT.jpg

it's time for news parts ?
(or a 4th engine because other 3 are dead... ?)
My buddy on the fork lift! P Timpini!
You should make him do some photos for us! Timpini!
Machines are fixed with tools and parts and people with kindness and understanding.