Red Bull RB13 TAG Heuer

[FrukostScones]

And this one:
https://imgr2.auto-motor-und-sport.de/R ... 071253.jpg

Have the outer edges always been like that?

no, they have been not.
launch spec:
https://pbs.twimg.com/media/C5qeEqgWYAItlwS.jpg:large

Same diffuser from what I can tell.

I don't think RB13 problem is diffuser related, problems lie upstream and I'm sure sorting that will highlight diffuser and floor issues.

Diffuser should be updated soon though now that correlation issues are now understood and updates are seemingly working as expected.

look again. (and count)

[rileykirn]

A little more info, this time with some barge board & floor conditioner details: https://www.motorsport.com/f1/news/f1-t ... 13-907429/

[SR71]

no, they have been not.
launch spec:
https://pbs.twimg.com/media/C5qeEqgWYAItlwS.jpg:large

Same diffuser from what I can tell.

I don't think RB13 problem is diffuser related, problems lie upstream and I'm sure sorting that will highlight diffuser and floor issues.

Diffuser should be updated soon though now that correlation issues are now understood and updates are seemingly working as expected.

look again. (and count)

https://imgr1.auto-motor-und-sport.de/M ... 009621.jpg

https://imgr2.auto-motor-und-sport.de/R ... 071253.jpg

You're correct, subdivided the outer element. Nice catch!

[rileykirn]

https://twitter.com/ScarbsTech/status/8 ... 3817064448

[lio007]

good pics from AMuS:

[Godius]

Double-decker t-wing with an extended endplate. https://twitter.com/AlbertFabrega/statu ... 9615963136

[Flying JPS Lotus]

Interesting to see RBR with a T-wing in Monaco after claiming earlier in the season that they didn't need one. Then again maybe it's just cheap downforce for this weekends race.

[zioture]

More photos herehttp://www.newsf1.it/foto-gallery-2-tech-f1-monaco-gp/

[Godius]

there also seems to be a flat delta shaped wing on the front of the shark-fin


edit:

[wuzak]

there also seems to be a flat delta shaped wing on the front of the shark-fin
https://pbs.twimg.com/media/DAp9L-lWsAE_WCp.jpg:large

edit:
https://tweakers.net/ext/f/8DWSy4EMzlox ... medium.jpg

That may be there to stabilise the shark fin.

[wesley123]

It's application won't be much different than the plate Williams runs, or Toyota ran. Afaik it's to prevent spillage as under yaw there would be a pressure difference on both sides of the fin

[ScrewCaptain27]

Via @ScarbsTech:

[zioture]

All photos here http://www.newsf1.it/foto-formula-1-spy ... ontecarlo/

[shady]

As close as theyll get to putting that beamwing back..

[lio007]

Hm... Still no pics from Montreal