I just want to go back to the diffuser discussion from earlier:
Scarbs said:
Yes, but you are losing the taller\longer centre tunnel, this at 30cm wide x 80cm long x 40cm high, is a significant loss in all dimensions.
My reading is that rules 3.10.5 and 3.10.6 allow a smaller central section of 150mm instead of 300mm
3.10.6 says:
No part of the car less than 75mm from the car centre line and more than 350mm behind the rear wheel centre line may be more than 400mm above the reference plane.
This doesn't conflict with 3.12.7
No bodywork which is visible from beneath the car and which lies between the rear wheel centre line and a point 350mm rearward of it may be more than 175mm above the reference plane.
Overall volume is smaller and net downforce probably won't alter that much. Anyone disagree?