Just_a_fan wrote: ↑01 Dec 2020, 00:56
Edax wrote: ↑01 Dec 2020, 00:32
Sure there would be better solutions like the Indy safer wall, but I am afraid that would not be economical to operate on a track like this.
The only thing I did not like was that the monocoque wedged itself between the rails. But it seems that there was no vertical fixation between the rails. That should be solvable with a couple of bolts.
Cheap tyres and a conveyor belt facing would have done a reasonable job of absorbing impact energy and preventing penetration of the armco. But to think that a country such as Bahrain couldn't afford to throw some Tecpro barrier up in front of that section of armco seems a bit unlikely.
https://www.racefans.net/wp-content/upl ... 3-43-1.jpg
Of course for one location you’re right . Zandvoort was recently updated, but there they only used Tecpro at specific locations, for the rest they used Armco. Lining a complete circuit with Tecpro is a huge cost factor.
Perhaps they should have anticipated a high impact crash at that location. The accident was much harder because the wall was angled towards the track because of the exit road. That could warrant additional protection.
Overall I think these accidents are hard to foresee. You can anticipate on cars missing a corner or losing it on exit. But the way Grosjean violently crossed the track and bumped in to Kyviat, that could happen on any point on a track and send off cars at very strange angles. If you take these kind of scenario’s into account, I guess you can find weak points in any circuit.
Perhaps a much better investment would be a warning light that there is a car next to you, like most road cars have in their mirrors nowadays. I think we see at least one crash per raceweekend because someone misses a car in his blind spot. In this case it would have prevented Strolls rollover as well.