Exhaust blowing brake ducts

Here are our CFD links and discussions about aerodynamics, suspension, driver safety and tyres. Please stick to F1 on this forum.
User avatar
omar2726
0
Joined: 12 Oct 2010, 14:29

Exhaust blowing brake ducts

Post

Back in testing earlier this year, some speculated that the teams have several options on where to blow the exhaust gases. Aside from sealing the diffuser, other options were the beam wing and the brake ducts.

How does a car benefit from blowing the brake ducts? Can it generate considerable downforce levels? Also, wouldn't it lead to overheating the brakes?

Thank you very much.
Is the glass half empty or half full?
Engineer - "The glass is twice as big as it needs to be."

Lycoming
Lycoming
106
Joined: 25 Aug 2011, 22:58

Re: Exhaust blowing brake ducts

Post

You don't blow the brake duct opening. If you look carefully, the teams all run lots of airfoils attached to the outside of the brake ducts. There's a small area that is unregulated, and they cram as many downforce generating elements in there as possible.

It probably does not generate obscene downforce levels, but it certainly generates a significant amount. More importantly, this downforce is unsprung. It acts directly on the wheel, as opposed to having to go through the chassis and springs. The main advantage of this is it reduces the pitch sensitivity, as the only movement will be from tyre flex. Done right, you will not heat the brakes appreciably by blowing these elements.

User avatar
omar2726
0
Joined: 12 Oct 2010, 14:29

Re: Exhaust blowing brake ducts

Post

Ahh. Thank you very much! :D
Is the glass half empty or half full?
Engineer - "The glass is twice as big as it needs to be."