New here, so not sure if this is the best place to post this!
I've recently built a CAD model of the AFP Halo according to the FIA technical documentation (link below for those interested). All of the major critical dimensions (mounting points, width, height, etc.) are accurate as far as I can tell. I didn't include all the holes and chamfers (as some of them are not dimensioned on the FIA drawings) and I can't promise the ones I've included are the right size/shape. (My future plans for this model don't require that level of fidelity.) Nonetheless, I thought people on here interested in running FEM studies, etc. might find this useful. I know it's not the most difficult thing to build yourself, but since I made it I thought I'd share.
At the moment, I've uploaded a copy to Thangs: https://thangs.com/Evie3D/FIA%20AFP%20( ... lView=true
If there's a dedicated page on this site for file sharing let me know and I'll post it there too.Hope some of you can get some use out of this!
Evie
FIA documentation (p55-57): https://www.fia.com/sites/default/files ... 2_v00.pdf