Pirelli to debut delamination remedy at Silverstone
Pirelli will bring the P Zero Orange hard and P Zero White medium tyres to Silverstone for the British Grand Prix: effectively a second home race for the Italian squad, whose UK logistics hub at Didcot is less than an hour away from the Northamptonshire circuit.
There will also be two sets per car of the same prototype hard tyres seen in Spain, available for use in Friday’s two free practice sessions only.
Silverstone is one of the oldest and fastest circuits on the Formula One calendar, having benefitted from extensive revisions over recent years. The rapid circuit layout means that plenty of energy is put through the tyres, with a consequent effect on wear and degradation. In the past, teams have used strategy to their advantage on this track, resulting in some close finishes even with different tactics being employed.
Paul Hembery, Pirelli Motorsport director: “Silverstone, with its very high average speeds and flowing series of corners, presents an extreme contrast to Canada three weeks ago – which was much more stop and start. Like Canada, it’s a circuit that takes a lot out of the tyres, but for very different reasons. We’ve brought the two hardest compounds to the British Grand Prix because of that, with a new bonding process connecting the tread to the steel belt, which is designed to eliminate the isolated delamination issues to reach a unanimous agreement about this: however, we do still have that possibility on stand-by should it be required in future. During free practice at Silverstone we will have the same prototype hard seen earlier this season. The actual construction of the tyre won’t change and the tyre is aimed at even greater durability than our current hard. This is in order to give the teams the chance to test this new compound on a different track to collect more data. Of course another important factor at Silverstone is the notoriously variable British weather: it would be no big surprise to see the Cinturato Green intermediate and Cinturato Blue full wet brought into play at some point. For that reason, it’s quite hard to predict the number of pit stops on race day. Last year we saw a two-stop strategy in dry conditions after two wet days but this year the compounds are softer, so if it stays dry we could have between three and four stops. We should be in a position to make a more precise forecast after free practice. Finally, and most importantly, we would like to pass on our sincere condolences to Allan Simonsen’s family and friends following the terrible accident at Le Mans last weekend. We were Aston Martin Racing’s partners for many years, and we can only imagine what they must be going through now.”
Jean Alesi, Pirelli Development driver: “The real thing to watch out for in Silverstone is always the weather: absolutely anything can happen, and it’s often both wet and dry. You need to think on your feet. It’s a demanding circuit on the tyres, not so much because of traction and braking, but more because of the high levels of downforce that are always pushing down on the car, as a result of the very high speeds. This is what creates the tyre wear at Silverstone and so the hard and the medium tyres are a good choice. As a driver, I’ve been on the podium at Silverstone many times and always enjoyed it, in various configurations. The latest alteration with the new pit complex is a very impressive investment, but for me it’s a shame they took away Bridge corner: that used to be a fantastic challenge. In any case, Silverstone will always be a real drivers’ circuit, so I think we can look forward to a good race, less politics, and some interesting strategies. It’s always a pleasure to come here because the British fans are so knowledgeable and passionate about Formula One. There’s a real culture of motorsport in Great Britain, which I think everybody appreciates.”
The circuit from a tyre point of view While big speeds and high levels of lateral energy are the key characteristics of Silverstone, there are also some slower and more technical parts of the circuit where it has been modified in recent years. In those areas combined acceleration is particularly important. This happens when the driver is steering and accelerating at the same time on the exit of a corner: the work of the tyre is crucial here.
Many parts of the asphalt at Silverstone are new, with the new asphalt less bumpy and abrasive than the older sections. Abrasive asphalt increases grip, but also adds to levels of wear and degradation.
Lateral accelerations on the tyres are among the highest of the season, peaking at 5g. This means that the surface temperature of the tyre can exceed 110 degrees centigrade, towards the very top of its working range.
