Aleksander Ginter
Nope. If you look at the message above yours, you can clearly see that it is perpendicular to the roadway.mclaren111 wrote: ↑28 Aug 2023, 13:15Is this section bending parralel to the ground ?
https://i.ibb.co/sCxK8XL/gfop2mG.jpg
Unless the angle is deceiving me, that curled section is the second shedding edge of the strake. You can see on the other side the shape of the strake and I assume the curvature is just the tip of that edge, similar to a footplate shape. It probably isn't parallel to the ground due to legality but curved close to a flat plate It is likely done to control where along the stake the main vortex is shed.mclaren111 wrote: ↑28 Aug 2023, 13:15Is this section bending parralel to the ground ?
https://i.ibb.co/sCxK8XL/gfop2mG.jpg
It'll do the job. A bit primitive but is at least lower downforce, I'm happy with that! Now we need to see what it is like on track...
The first wing is more medium downforce with all the development that will bring the Aero efficiency, whereas the second new wing is something very basic they have put together quickly with little time to develop the efficiency. It will be interesting to see which runs in the end.
I have a feeling the Low DF wing is something that might have been created pre testing or some basic version that had some analysis already but may not work with this latest package. Basically something already in the drawer that they could use, but not sure how effective it will be in this latest package with the Diffuser and current beam with it is trying to integrate with.
Yea seems a fair assessment to memwillems wrote: ↑31 Aug 2023, 13:38I have a feeling the Low DF wing is something that might have been created pre testing or some basic version that had some analysis already but may not work with this latest package. Basically something already in the drawer that they could use, but not sure how effective it will be in this latest package with the Diffuser and current beam with it is trying to integrate with.
It seems like the floor and the sidepods change as one, and to a degree the Diffuser, beam Wing and RW come as package now too and need to work together correctly, simply bolting on a smaller wing isn't necessarily going to work.