Ah, that's more like the Brawn I know and love. Lovely bit of sticky tape, sought that out nicely gov'nor.Timstr wrote:Here you can clearly see it's a quick and dirty solution:
http://www.motorsport-total.com/f1/bild ... 729&sort=1
Ah, that's more like the Brawn I know and love. Lovely bit of sticky tape, sought that out nicely gov'nor.Timstr wrote:Here you can clearly see it's a quick and dirty solution:
http://www.motorsport-total.com/f1/bild ... 729&sort=1
Looks like my observation may not be wide off the mark.Timstr wrote:The car looks a bit front heavy compared to other cars:http://motorsport.nextgen-auto.com/gall ... 052wri.jpg
As short front end puts relatively more weight over the front axle,
could it be that they misjudged the required fundamental weight distribution of the car?
This would be in line with the reported understeery nature of the car and RB's comment about making changes to the weight distribution for Jerez.
From: http://www.jamesallenonf1.comThe suspicion doing the rounds is that Mercedes has miscalculated the weight distribution slightly, with the weight too far forward. They are working to solve this with new suspension solutions.
Agreetoshinden wrote:...if till bahrain's FP they still use those front wing and diffuser then this season might no go their way. But I believe that Ross can do something about it.
Looking at it, i would deduce it was an effort to increase front grip, by having that surface slanted against the flow. I'd say it has nothing to do with channeling air. It's basically a turning vane, where changing the momentum of the air results in a reaction force on the nose, which happens to be in the vicinity of the the front wing and wheels.F1_eng wrote:Confused_Andy, how can you say that Mercedes GP haven't done any good cars in a long time? Only the one that won the world championship last year, it would have been even more convincingly if it weren't for the drivers making a hash of it.
The nose design is not about chaneling air down the nose, in-fact its nothing to do with the top surface at all. I'm sure someone on here must have worked-out the philosophy behind the design?
The mclaren device looks like it work much differently to me. What it does is it put the same effect of the top of the Merc. nose but much lower. I don't think is is doing what the lower surface of the Merc. nose is doing.F1_eng wrote:No, remember that region has a huge upwash from the front wing. and your theory doesn't stand up in many ways. some of the approach might be true for flow in a pipe but not an open domain. there is major interaction with the splitter and keel area which is different on each car.
mclaren have a device that creates a similar effect but they also have a higher nose. i have been investigating this type of nose design on and off for the past year or so. i wont say for who, perhaps i did the mercedes nose?