Maybe that thing is just wide enough to give the Y250 vortex an initial push to the side?
In that case, the way that vortex rotates, it becomes "the thing's skirt" and we might indeed have a front diffuser of sorts.
Thanks! Yeah I figured just as much. Looking at the performance of the car across the FP sessions seems their upgrade package is producing the right results. But this is just one track. What a hefty upgrade they have brought! Crazy! Loving this season!
That's what I was indirectly hinting at. If I was an FIA inspector, Mercedes would have a hard time convincing me that's brakes related.AnotherAlex wrote: ↑12 May 2017, 12:39Presumably that winglet is part of the ducting for the braking system ( ) otherwise I would have expected it to fall foul of the regulation stating that bodywork influencing aerodynamic performance must be mounted on the sprung part of the car (Article 3.8, b):
Agree of course that they will not develop a car to be less sensitive to dirty air on purpose. I feel it is a knock on effect of this biological theme.Vanja #66 wrote: ↑12 May 2017, 08:05It is counter intuitive, but here's my view on why. In dirty air you don't loose vortices, they just don't work as expected (their strength decreases) so when you have 15 of them (as you say) all 15 of them will suffer. Some more, some less, but all will suffer. It's not like 3 will fail to work and others will be OK...
In that sense, for me, this is Mercedes trying to get back their previous full advantage in qualy and their previous full advantage in first laps of the race. That's how they dominated previous 3 seasons and it makes much more sense to try and achieve that again than going into the unknown and develop the car to be less sensitive to dirty air...
Blaze1 wrote: ↑12 May 2017, 09:06https://pbs.twimg.com/media/C_jNvDAXUAAXqWN.jpg
The device looks like it may have a splitter like function. Looking at the picture above, I see comparisons to the cars coke bottle and diffuser (not so stay it actually functions as such. Not so much the diffuser aspect anyway). The curvature of the underside may serve to reduce pressure when tied to the 'diffuser like' rear edge. The leading edges of the vanes look like they may shed a vortex or vortices that are deflected downwards by the nose camera mounting vanes, where they are likely to interact with the bargeboards. These vortices in conjunction with coke bottle sweep-in, may encourage more air to flow around the side of the nose and then under the monocoque.
It also looks like there may be a Red Bull inspired duct near the upper trailing edge of this splitter like element show below:
http://i.imgur.com/fThgoAK.png
Mercedes may also have a cover for this duct:
http://i.imgur.com/iKuuz37.png
Do you have a smaller thumbnail? /sF1NAC wrote: ↑17 May 2017, 18:34Mercedes floor
https://pbs.twimg.com/media/DACqoDQXYAA1dYm.jpg:240x240