Red Bull RB13 TAG Heuer

[ME4ME]

Looking forward to see Red Bull's upgrades this weekend. Expecting minor detail changes, as always, but interesting none the less.

[f1rules]

Actually i think you can expect something decent, i think was dan ric thay was qouted saying they have a big package for this weekend

[Mamba]

Actually i think you can expect something decent, i think was dan ric thay was qouted saying they have a big package for this weekend

To be honest most "big" upgrades this year turned out to be a few tweaks with perhaps something new. We'll have to see what they bring but as of now I am containing my excitement.

MAMBA

[gandharva]

Well, they've decoupled the much stiffer endplate from the flaps, so they can pivot around the front mounting, simple and clever, as it also lets high pressure air spill sideways as the gap opens to the vertical endplate.

They have this since Barcelona tests. Maybe they could not use it fully until they clawed back the loss of the trick-suspension?

[digitalrurouni]

Uff that is good looking

[seezung]

New Mirrors on the Red Bull

[ScrewCaptain27]

Via AMuS:

[Morteza]

They have added this to reduce the flexing apparently

Via @Albrodpul

[ME4ME]

That wasnt THE flexing part though

[gandharva]

That wasnt THE flexing part though
https://cdn-5.motorsport.com/images/mgl ... arison.jpg

It was. The flaps are connected with the green part highlited in your picture.

[SR71]

That wasnt THE flexing part though
https://cdn-5.motorsport.com/images/mgl ... arison.jpg

I think the angles are too different to accurately compare, use the Rousch logo as a reference point.

Also notice rousch and mobil logo are in reverse so somone snapped the other side of the car and mirrored.

Not a good tool to identify a few degrees of movement, HOWEVER, I'm not disagreeing with the assessment of flexing in that area.

[rileykirn]

Looks like a side pod inlet profile change:https://imgr1.auto-motor-und-sport.de/R ... 108130.jpg

[jagunx51]

Looks like a side pod inlet profile change:https://imgr1.auto-motor-und-sport.de/R ... 108130.jpg

I dont tnhink so, the orange tape is what the actual hole is, the curve is on the inside

[Mamba]

I have not figured out how to post tweets over phone, but they did change the inlet profile and the sidepod turning vanes from the photos I've seen.

MAMBA

[Sevach]