McLaren MCL33

[PlatinumZealot]

Tidy little car.

Needs stegosaurus fins to put the icing on the cake.

[PhillipM]

Tidy little car.

Needs stegosaurus fins to put the icing on the cake.

There should be a few down the back of the halo behind where they currently have the winglets/spoilers unless they've ditched them since xmas.

[PhillipM]

Yes I do, but there is something sticking up and between the two arms of the split wishbone, it has a Jagged, torn edge, brown colered specs where it has torn. A cm or two back also something White is torn where it seems the Outer layer of material has ripped off.

...and the perfectly clean, straight line of the wishbone besides it shows you it's not the wishbone, but more likely just the gearbox housing you're seeing or cover with a bit of gravel rash.
The fact there's a wheel on it should give you a clue too. You're having posts deleted because this belongs in the testing thread, not here.

[f1rules]

compared last years rb

[mclaren111]

Aero testing this morning.

[Morteza]

[Morteza]

Via AMuS


Via @F1debrief

[Egresi Tamás]

Burns

[oetger]

[mclaren111]

Burns
https://pbs.twimg.com/media/DXCT6KaW4AE_Eg1.jpg:large

Outlet at the end - just behind where Renault is written.

[santos]

Is that burnt?

[Godius]

[Thunder]

Good look at the Halo Fairing with Flowviz:
[media]https://twitter.com/AlbertFabrega/statu ... 3778434050[/media]

[Lucky]

https://pbs.twimg.com/media/DXCXdQ2WkAAVJ0c.jpg

[cyclon]

https://pbs.twimg.com/media/DXCXdQ2WkAAVJ0c.jpg

A bit scary .....
but if you check where pit crew blowing air it's easily understandable that they know about it!
That's why the small inlets...